Used when replacing glass, installing stereo equipment, body work, and panel replacement
Strong impact resistant design made of glass reinforced nylon
Designed to be flexible and are less likely to dent or damage surfaces
Made in the USA
Williams is a Snap On Industrial Brand
Williams set is 16 pc
Suitable for use with pneumatic and electric impact wrenches
Designed for quick engagement on 6 point fasteners
Sockets feature super torque lobular openings for greater turning power without deforming the fastener
Specially heat treated for impact use to provide long life, safety, and durability
Made in USA
The tool with the support telescopes from 20" to 48-1/4"
Then set the hood prop base into the holding support
Place the support over a hood adjuster
Made in USA
Plug the tool into the cigarette lighter or power accessory receptacle; You now have a ground and power source on the dash
The plug light will come on to signal the plug is properly connected and both power and ground are available at the posts
For power, connect to the positive (+) terminal; For electrical ground, attach ground wire from the instrument to be grounded to the negative (-) terminal
Half/Cut TORX, Torx length cut to ½ the normal depth, increases strength and improves fastener engagement.
Fits into the fastener and makes the feeling better with less wiggle or wobble
Knurled body for fingertip control.
1/4-Inch square drive, with 3/4-Inch overall length, the shortest drivers available.
Limited Lifetime Warranty
Torque Range: 5 - 40 Inch Pound
Ideal tool for low torque assemblies, precision applications and dash/under dash work on most domestic and imported vehicles.
Driver accepts all standard 1/4" hex screwdriver bits
Cam-over torque limiting clutch free-wheels 90° when set torque is achieved
Lightweight, rugged construction features red anodized aluminum body with stainless-steel shank
Made in USA
Fits a wide range of struts and no special adapter shoes are needed
Tool compresses springs of 4" to 9" O.D. with wire diameters of 7/16" to 11/16"
Can be driven by an impact wrench
Second generation Lug Ripper
Easily drill out stripped/broken lugnuts in minutes
Tungsten steel drill bit with 4 carbide cutters for speed and durability
Williams is a Snap On Industrial Brand,
Made in the USA
Blade Length: 2", Overall Length: 9-13/16", Accepts all standard 1/4" hex shank bits. Includes number 2 Phillips bit.
Ergonomically designed T-Handle fits the palm and provides extra leverage.
Hi-impact plastic handle for durability and flexibility in all types of work applications.
Heavy duty 3-way On-Off-Locked ratcheting mechanism allows consistent and smooth operation.
Stainless steel shank eliminates problems of chrome chipping or rust.
Controls relay circuit independent of “key on” systems
Run all automotive, 12V DC motors with a push of a switch
Simplifies fuel injection testing
Use in conjunction with clamp-on Amp Probes and Lab Scopes
Operating range: Up to 20 amp continuous, 30 amp surge (12V); covers most makes and models
Charge and Maintain 6 and 12 Volt Batteries
2/10/20 Amp charge rates for added versatility
Fully automatic operation
Advanced multi-phase charging process
Power supply mode provides stable power to maintain system voltage for use in a wide variety of applications
Tube and die set stabilizing arm for easy tube forming
Magnetic adapter holder keeps adapters in place
Equipped with an enlarged die set compression area for better grip of dies
This tool can be used on "Annealed Steel" & "Dead Soft".Create perfect production quality flares on annealed stainless steel tubing, terne plate steel tubing, soft aluminum and soft cooper tubing
Includes Mastercool 70027 mini tube cutter for 1/8" to 5/8" (3 - 16 mm) O.D. tubing (1/8 to 1/2" nominal)
From the front of the tractor to the back of the trailer, the HD Fleet Technician’s Electrical Terminal Maintenance Set provides the necessary tools for cleaning, restoring and maintaining the most common electrical terminals found in today’s fleets
Clean male and female electrical terminals
Removes corrosion and extends harness life
Ensures proper diagnostic connectivity
Connector types: Deutsch, Cannon, 7-way round pin, Bullet, Weather Pack, common ABS sensor and power connectors, trailer light connectors, common plow connectors, etc.
Accurately torque wheel nuts to recommended torque
Increase efficiency and eliminate damage caused by impact wrenches
No maintenance or calibration necessary
1/2 Drive set includes: 65ft/lbs. (90Nm), 75ft/lbs. (100Nm), 80ft/lbs. (110Nm), 90ft/lbs. (120Nm), 100ft/lbs. (135Nm), 110ft/lbs. (150Nm), 120ft/lbs. (160Nm), 130ft/lbs. (175Nm), 140ft/lbs. (190Nm), 150ft/lbs. (200Nm)
C4 LED technology is shock-proof with a 50,000 hour lifetime
Deep-dish parabolic reflector produces a concentrated beam with optimum peripheral illumination.
Optimized electronics provide regulated intensity throughout battery charge
Included NiMH battery is rechargeable up to 1000 times; Flashlight also accepts NiCd battery
IPX4 water resistant
1 meter impact resistance tested
Machined aircraft aluminum body with non-slip rubberized comfort grip
Anti-roll rubber ring included
120-Volt AC/12-Volt DC Piggyback charger included
Used for diagnosing electrical faults and CAN bus line activity
Check power and ground circuits, check active protocol lines, or connect a multimeter or oscilloscope for detailed signal analysis
Connect, detect, monitor voltage and more
Connects between Diagnostic Link Connector (DLC) and scan tool
Detects data and protocol communication and monitors system voltage with a display and high/low alarm
Designed for easy removal of the most popular types of pitman arms, tie rods, and ball joints
Features pitman arm puller, tie rod puller and a universal ball joint separator
Includes a tie rod end puller as well as pitman arm puller and a universal tie rod end remover
Pulls flange-type rear axles, stubborn oil seals and bearings and other press-fit parts
Jaws can be set up for 2/3 way internal or external pulling jobs
Contents packaged in a convenient plastic, blow-molded carrying/storage case
Re thread damaged male and female brake fittings
Compact dual design male or female combo sockets
Re thread damaged brake fittings on vehicle
Works on vehicles where stand tap and dies wont fit
Most common sizes - SAE and Metric
Made in USA
Wire Size: 0.020" to 0.060"
Standards: ASME B107.500-2010 Application: For Aviation and Automotive
