Made in the USA
Designed to help remove gasket residue on steel and aluminum heads and manifolds along with carbon build-up and even rust
Can be used to clean disc brake caliper slides
Tungsten carbide tip is brazed to the steel blade that is molded into the comfortable 6" long handle
Optimum turning power and torque with 3-sided ergonomic handle
Greasy hands are no problem with patented slip resistant handle surface
Rugged and long-lasting with high-alloy German steel blade
Great strength and durability from forged butterfly shank molded into handle
Precision machined tip for a perfect fit
Retractable test leads pull out and stay at desired length
Rewind test leads into protective case when not in use
Include insulated alligator clips
18 gauge copper wire
Different color wires allow for easy identification
New dual AAA battery powered design. 4X the battery life and simplified battery installation.
New 21” Stainless braided hose for increased durability
Maximum accuracy and 0.1psi resolution for use with TPMS (Tire Pressure Monitoring System)
Displays KG, PSI or BAR measurement
Large face backlit LCD digital read-out
Unit covered with rubber sleeve for extra comfort and durability
Works on with nitrogen systems and CO₂
Made in the USA
A complete solution to pressure test all radiators and plastic reservoirs in passenger vehicles and light-duty trucks
Eliminates the need to purchase unnecessary and expensive adapters
Made from the highest quality anodized aluminum and solid brass components
Ratcheting gear wrench with slim head allows speedy access in even the most compact areas of today's smaller engines
Ultimate set to service a wide range of vehicles with spring-loaded tensioner pulley
16 pc. Set includes Longbar, Gear Wrench 3/8", 1/2", 3/4" Adapters, 7 6 pt. 13mm-19mm stockets, 13, 14, 15mm crows foot.
Lifetime Warranty, Serpentine Belt Tools together in blow molding case.
Unique patent design of box end which can open and fasten even a 50% rounded off screw
Long length body provides access into narrow and deep space
The offset gear offers more surface contact and access to recessed fasteners
90 teeth ratcheting wrench provides high torque requiring only 4° of movement
Oval reversible pin, high strength material provides high torque for frequent usage
Flexible box end design works in multiple position (0 to 180 degrees)
Includes sizes: 8mm x 10mm, 12mm x 14mm, 13mm x 15mm, 16mm x 18mm, 17mm x 19mm
Made in USA
9-3/4" Length
Great for removing small fuses, "O" rings, adjusting and retrieving small parts, removing transmission oil seals and clips
IRWIN bits are manufactured from industrial-grade tool steel
Bit set is tested to meet the highest standards for hardness and torque
2" socket adapters: 1/4", 3/8" and 1/2"
2" power bits: #1 Phillips, #2 Phillips, #3 Phillips, #1 POZIDRIV, #2 POZIDRIV, #3 POZIDRIV, T8 TORX, T9 TORX and T10 TORX
3-1/2" power bits: #1 Phillips, #2 Phillips, #3 Phillips, #2 POZIDRIV, T15 TORX, T20 TORX, T25 TORX and T30 TORX
Four double-edged cutting/gripping edges = 8 points of contact
Non-slip engagement removes even the toughest frozen bolts
Tip has built-in center punch with no additional tool required
The new generation of Screw Extractors, Tapered flute design
Made of high-strength steel (chrome vanadium) for greater resistance to breaking and rounding out
For unscrewing ruined screws and bolts without damaging threads
Can be turned in clockwise or counterclockwise direction (for right-and left-hand threads)
100% Made in Germany by Rennsteig
Made in the USA with Global Material
Our largest combo set comes with machine screw, fractional and metric taps and dies, screw extractors and high speed steel drill bits
Delivering quality every step of the way in your threading applications
Ideal for auto repair and machinery
High carbon steel construction provides durability
Fractional tap and die sizes: 4-40, 6-32, 8-32, 10-24, 10-32, 12-24, 1/4-20 NC, 1/4-28 NF, 5/16-18 NC, 5/16-24 NF, 3/8- 16 NC, 3/8-24 NF, 7/16-14 NC, 7/16-20 NF, 1/2-13 NC, 1/2-20 NF, 1/8- 27 NPT
Metric tap and die sizes: 3mm - .50, 4mm - .70, 4mm - .75, 5mm - .80, 5mm - .90, 6mm - 1.00, 7mm - 1.00, 8mm -1.00, 8mm - 1.25, 9mm - 1.00, 9mm - 1.25, 10mm -1.25, 10mm - 1.50, 11mm - 1.50, 12mm - 1.50, 12mm - 1.75, 1/8" - 28 BSP
1" hexagon dies: 4-40 (3mm-.5) through 1/2"-20 (12mm-1.75), 1/8"-27 NPT and 1/8"-28 BSP
Works on twin and quad piston fixed calipers, as well as single and twin piston floating calipers
Centrally located ratchet evenly spreads force in a parallel manner to prevent misalignment of pistons
Ratchet technology gives a full 360 degree swing so that the spreader may be placed at any position
Extended reversing lever allows for easy change from spreading to retracting
Made in the USA
Fully retracted: 1-1/2”, Fully expanded: 3”
Drives camshaft bearings smoothly
Includes: Driving shaft, driving shaft extension, expander unit, five split driving plugs, two driving collars, centering cone & blow molded case.
One complete low cost set that will remove or insert camshaft bearings in nearly all engines from compact cars to heavy trucks.
Range of 1.1 25" to 2.69" (28.58 - 68.3mm). Easy on bearings.
The expander has a neoprene sleeve over which the split driving plugs are mounted & expanded to size. This tool has two sets of rubber sleeves supplied w/ it for each expanding driver.
For brake service and slack adjuster installation on heavy-duty trucks equipped with Bendix slack adjusters
Extra deep hex allows reach to recessed adjusters
9/16" Extra Long Automatic Slack Adjuster Wrenchnism
Made in the USA
7/16" Automatic Slack Adjuster Wrench is for brake adjustment on heavy-duty trucks equipped with Haldex slack adjusters. This slack adjuster wrench has an extra-long handle, which provides comfort while overcoming the anti-reverse mechanism.
For brake adjustment on heavy-duty trucks with Haldex slack adjusters
Extra-long handle provides comfort while overcoming the anti-reverse mechanism
Made in the USA
Lang Tools (4651) Automatic Slack Adjuster Release Tool and Wrench is for use with automatic slack adjusters on Meritor systems. The 4651 includes a fork-end tool, which is for releasing the tensioner button, and the 5/16" double square offset reversible wrench features an E-Z Grip handle.
For adjusting automatic slack adjusters on Meritor systems
Release the anti-reverse mechanism without prying and apply more turning power with less fatigue to the hand
Williams is a Snap On Industrial Brand.
9-Inch long
Includes 5 bits
Ergonomically designed handle for greater user comfort and control
Heavy duty 3 way on off locked ratcheting mechanism allows consistent and smooth operation
Powerful magnetic shank securely holds bit in place before, during, after the job application
Made in the USA
CDI Torque is a Snap On Industrial Brand.
Each tool comes with a Certificate of Calibration and custom molded storage case.
The CDI Torque does not have the Snap On Dual 80 ratcheting mechanism; the remainder of the wrench is identical.
Torque Range: 30 - 250 Foot Pound
Handles are lightly knurled for a tough, non-slip grip. Dual scale, calibrated dual direction, Positive lock with spring loaded pull down lock ring
Fast, accurate and easy to set, Easy-to-read laser marked scales, Most feature quick release buttons which provide good socket retention as well as easy socket removal
Accuracy: ± 3% clockwise ± 4% CCW of indicated value, CW, from 20% to 100% of full scale
Made in the USA
Torque Range: 40 - 250 Foot Pound
Nickel/Chrome finish with ergonomic grip
Tool does not have to be 'turned down' after use, providing convenience
Torque setting locks on adjustable wrenches for repetitive applications
Adjustment knob eliminates spring tension, so setting torque on adjustable wrenches is fast and easy
Made in France
Unique jaw design fits Clamps up to 2" (51mm)
Extra-heavy duty 5/64" (2mm) cable
Bi-material grips with snap feature for compact storage
Ratchet lock with slide guide
Pivoting jaw piece
