Ultra Bright UV/Blue LED Light
6 Levels of Sensitivity (15 Levels of Detection)
Tri-Colored Visual Leak Level Indicator
Meets SAE J1627 and CE Conformity
Detects all refrigerants (CFC's, HCFC's, HFC's)
Universal design allows tool to fit fuel tank lock rings on Ford Chrysler and GM vehicles
Tool easily removes and installs lock ring on the fuel tank when servicing the fuel pump or fuel sending unit
Used with a 1/2" drive ratchet or breaker bar
Lifetime limited warranty
Channel design on body allows 2 interchangeable sets of legs to adjust to fit rings from 4" to 7-1/4" and keeps the drive centered.
Works on the smaller GM serrated rings and traditional rings. New leg set works on many 2004 and newer vehicles including Ford F150, Chevrolet pickups, Chrysler/Dodge mini vans, PT Cruiser, Dakota and Durango.
Design is compact so the tool is not left hanging over the work area with the potential of hitting other components.
Made in USA
Quickly removes and installs fan clutch when repairing the water pump or fan clutch.
Faster and easier than conventional fan clutch wrenches. No holding wrench is necessary.
Set includes 7 driving wrenches that fit Ford, GM, Chrysler & Jeep. Set now includes 7/8", 32mm, 36mm, 40mm thin and new 47mm size to fit Ford 6. 0L and 6. 4L Power stroke diesel pickup. 1-7/8"and 2" are still included in the set. 1-1/2" 41mm and 42mm are still available individually.
Use with an air hammer.
Includes blow molded storage case.
Made in USA
This set includes a piloted drill, spring-loaded tapping tool and 5 magnetic drain plugs
The unique tapping tool ensures the new thread will be perpendicular to the gasket surface to prevent leakage
Works on soft steel and aluminum oil pans with 1/2 inch, 12 mm and 14 mm threads
Can be used on the vehicle when room permits
Made in the USA with a Lifetime Warranty
Used for a multitude of applications, such as removing gaskets, rust, paint, carbon buildup, and floor tile
Blades are ground for a sharp edge and can be resharpened after heavy use to RETURN the cutting edge to its original sharpness
Capped end allows for striking without damaging the handle
The patented, two-composite handle is ergonomically designed, providing superior comfort & grip
Hardened and tempered alloy steel that is black oxide finish for additional rust protection
Variable speed switch controls motor speed from 950 to 1650 RPM
(2) Built in grounded receptacles have the ability to run other equipment
Versatile allows for use in a variety of applications both indoor and outdoor
Create a cooler and cleaner air flow in work stations allowing equipment to work faster and more efficiently
Quickly diagnose internal engine problems such as bad rings, valves and leaking head gaskets. Kit come complete with adapters for most applications.
Dual 2-1/2" gauges feature chrome bezel and rugged protective outer boot.
Scales read 0-100 psi and 0-700 kPa.
Pressure regulated manifold includes quick couplers.
Long flex 24" 14 mm hose.
10 mm, 12 mm and 18 mm thread adapters.
Made in the USA
Low Profile, 6 Point Wrench with Offset 3/8" Square Drive for Clearance in Hard-to-Reach Spaces
Size is laser marked on each wrench.
Comes with a blow molded Case for storage.
Use on oil and fuel filter canisters when replacing the filter element.
Smaller sockets are 7/8" hex and larger socket is 1.25" hex to fit eight common domestic and foreign antenna nuts
Made of heat-treated alloy steel for durability
Complete applications are listed on enclosed card
Sockets are also available individually
Heavy Duty 60, 000 PSI Ductile Iron Castings
6. 5” Wide Jaws
7” Jaw Opening (11” when reversed)
4” Throat Depth (3” when reversed)
1/8” – 3. 5” Pipe Jaw Capacity
360 degree swivel base
Gear type locking system with double lock down bolts
Two Anvils: Lower: 3. 4" x 3. 6" Upper: 6. 5" x 2. 2"
4" Extra Deep Sockets for removal and installation of automotive bumpers
6 Point Hex
Made of bright chrome finished chrome vanadium
Set Includes: 8 mm, 10 mm, 11 mm, 12 mm, & 14 mm
Made in the USA
Two piece hose removal set includes straight tip for pushing and 150-degree tip for pulling
Rounded profile reduces gouging and puncturing of hose and mating connector
For use on various hoses, such as radiator, heater, turbo and intake ducting
13 piece- 3/8" drive spark plug socket set with three different configurations, standard, universal and extra deep
This set allows for use with wrench or ratchet and socket openings are designed to reduce the rounding of fasteners
For use on a variety of foreign and domestic cars
New Flank Bite design works on up to an industry leading 90% rounded lug nut
Design uses angled teeth to bite exclusively into the flat sides of a lug nut, ignoring rounded points and only getting tighter as you impact
Features spinning protective sleeves that remain stationary while socket spins to avoid scuffing wheels
Also safe for forward tightening of lug nuts without damage
Made in the USA
Non-Marring/Non-Sparking, Will Not Damage Harder Steel Materials
Includes 3/8", 1/2", and 5/8" Drift Punches
Packaged In A Convenient Tray And Cover For Storage
LIFETIME WARRANTY WITH SUNEXPRESS: Get in the express lane with the industry’s leading warranty program and exchange warranted products directly with Sunex.
UNIVERSAL DESIGN: Allows you to position socket for work in tight spaces.
CR-MO STEEL: Provides the strength and flexibility to handle high torque impact tools.
RADIUS CORNER DESIGN: Reduces wear and increases torque on fasteners by placing force on fastener walls rather than fastener corners.
CHAMFERED OPENING: Quickly aligns fastener to socket.
DUAL SIZE MARKINGS: Laser etched and roll stamped markings to ensure permanent socket identification.
HEAVY DUTY STORAGE CASE: Convenient impact socket transport and storage.
Made in the USA
DEAD BLOW TECHNOLOGY – Head holds vibration dampening shot for increase power & control
POLYURETHANE HANDLE WITH STEEL CORE – Extreme durability for the toughest jobs
OIL AND CHEMICAL RESISTANT – Perfect for the automotive garage setting
NO-SLIP GRIP – Comfortable, durable grip for a strong hold in all conditions
Fast removal of push lock fittings for air, water, and hydraulics
Saves time and money
Used by Plumbing, Industrial, Automotive, and Trucking Industries
Now works on copper, Pex, CPVC, and PVC
Includes: Small Angle, Large Angle, Small Vertical, Large Vertical, Molded Case
Max Flame Temperature: 930°F
Adjustable Flame Length: .5" - 1.25"
Butane Fuel Type with electronic igniter
Organized Durable Case
Accessories Tips and Attachments Included
